엔티티 삽입

컬렉션의 엔티티는 동일한 필드 집합을 공유하는 데이터 레코드입니다. 모든 데이터 레코드의 필드 값은 엔티티를 구성합니다. 이 페이지에서는 컬렉션에 엔티티를 삽입하는 방법을 소개합니다.

개요

Milvus에서 엔티티는 컬렉션에서 동일한 스키마를 공유하는 데이터 레코드를 의미하며, 행의 각 필드에 있는 데이터가 엔티티를 구성합니다. 따라서 동일한 컬렉션 내의 엔티티는 동일한 속성(필드 이름, 데이터 유형 및 기타 제약 조건 등)을 갖습니다.

엔티티를 컬렉션에 삽입할 때 삽입할 엔티티는 스키마에 정의된 모든 필드를 포함하는 경우에만 성공적으로 추가될 수 있습니다. 삽입된 엔티티는 삽입 순서대로 _default라는 이름의 파티션에 들어갑니다. 특정 파티션이 존재하는 경우, 삽입 요청에 파티션 이름을 지정하여 해당 파티션에 엔티티를 삽입할 수도 있습니다.

Milvus는 컬렉션의 확장성을 유지하기 위해 동적 필드도 지원합니다. 동적 필드를 활성화하면 스키마에 정의되지 않은 필드를 컬렉션에 삽입할 수 있습니다. 이러한 필드와 값은 $meta라는 예약 필드에 키-값 쌍으로 저장됩니다. 동적 필드에 대한 자세한 내용은 동적 필드를 참조하세요.

컬렉션에 엔티티 삽입

데이터를 삽입하기 전에 스키마에 따라 데이터를 사전 목록으로 구성해야 하며, 각 사전은 엔티티를 나타내며 스키마에 정의된 모든 필드를 포함해야 합니다. 컬렉션에 동적 필드가 활성화되어 있는 경우 각 사전에는 스키마에 정의되지 않은 필드도 포함될 수 있습니다.

이 섹션에서는 빠른 설정 방식으로 만든 컬렉션에 엔티티를 삽입합니다. 이 방식으로 생성된 컬렉션에는 id와 벡터라는 두 개의 필드만 있습니다. 또한 이 컬렉션에는 동적 필드가 활성화되어 있으므로 예제 코드의 엔티티에는 스키마에 정의되지 않은 **color **라는 필드가 포함되어 있습니다.

from pymilvus import MilvusClient

client = MilvusClient(
    uri="http://localhost:19530",
    token="root:Milvus"
)

data=[
    {"id": 0, "vector": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], "color": "pink_8682"},
    {"id": 1, "vector": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], "color": "red_7025"},
    {"id": 2, "vector": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], "color": "orange_6781"},
    {"id": 3, "vector": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], "color": "pink_9298"},
    {"id": 4, "vector": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], "color": "red_4794"},
    {"id": 5, "vector": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], "color": "yellow_4222"},
    {"id": 6, "vector": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], "color": "red_9392"},
    {"id": 7, "vector": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], "color": "grey_8510"},
    {"id": 8, "vector": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], "color": "white_9381"},
    {"id": 9, "vector": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], "color": "purple_4976"}
]

res = client.insert(
    collection_name="quick_setup",
    data=data
)

print(res)

# Output
# {'insert_count': 10, 'ids': [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]}

import com.google.gson.Gson;
import com.google.gson.JsonObject;
import io.milvus.v2.client.ConnectConfig;
import io.milvus.v2.client.MilvusClientV2;
import io.milvus.v2.service.vector.request.InsertReq;
import io.milvus.v2.service.vector.response.InsertResp;

import java.util.*;

MilvusClientV2 client = new MilvusClientV2(ConnectConfig.builder()
        .uri("http://localhost:19530")
        .token("root:Milvus")
        .build());

Gson gson = new Gson();
List<JsonObject> data = Arrays.asList(
        gson.fromJson("{\"id\": 0, \"vector\": [0.3580376395471989f, -0.6023495712049978f, 0.18414012509913835f, -0.26286205330961354f, 0.9029438446296592f], \"color\": \"pink_8682\"}", JsonObject.class),
        gson.fromJson("{\"id\": 1, \"vector\": [0.19886812562848388f, 0.06023560599112088f, 0.6976963061752597f, 0.2614474506242501f, 0.838729485096104f], \"color\": \"red_7025\"}", JsonObject.class),
        gson.fromJson("{\"id\": 2, \"vector\": [0.43742130801983836f, -0.5597502546264526f, 0.6457887650909682f, 0.7894058910881185f, 0.20785793220625592f], \"color\": \"orange_6781\"}", JsonObject.class),
        gson.fromJson("{\"id\": 3, \"vector\": [0.3172005263489739f, 0.9719044792798428f, -0.36981146090600725f, -0.4860894583077995f, 0.95791889146345f], \"color\": \"pink_9298\"}", JsonObject.class),
        gson.fromJson("{\"id\": 4, \"vector\": [0.4452349528804562f, -0.8757026943054742f, 0.8220779437047674f, 0.46406290649483184f, 0.30337481143159106f], \"color\": \"red_4794\"}", JsonObject.class),
        gson.fromJson("{\"id\": 5, \"vector\": [0.985825131989184f, -0.8144651566660419f, 0.6299267002202009f, 0.1206906911183383f, -0.1446277761879955f], \"color\": \"yellow_4222\"}", JsonObject.class),
        gson.fromJson("{\"id\": 6, \"vector\": [0.8371977790571115f, -0.015764369584852833f, -0.31062937026679327f, -0.562666951622192f, -0.8984947637863987f], \"color\": \"red_9392\"}", JsonObject.class),
        gson.fromJson("{\"id\": 7, \"vector\": [-0.33445148015177995f, -0.2567135004164067f, 0.8987539745369246f, 0.9402995886420709f, 0.5378064918413052f], \"color\": \"grey_8510\"}", JsonObject.class),
        gson.fromJson("{\"id\": 8, \"vector\": [0.39524717779832685f, 0.4000257286739164f, -0.5890507376891594f, -0.8650502298996872f, -0.6140360785406336f], \"color\": \"white_9381\"}", JsonObject.class),
        gson.fromJson("{\"id\": 9, \"vector\": [0.5718280481994695f, 0.24070317428066512f, -0.3737913482606834f, -0.06726932177492717f, -0.6980531615588608f], \"color\": \"purple_4976\"}", JsonObject.class)
);

InsertReq insertReq = InsertReq.builder()
        .collectionName("quick_setup")
        .data(data)
        .build();

InsertResp insertResp = client.insert(insertReq);
System.out.println(insertResp);

// Output:
//
// InsertResp(InsertCnt=10, primaryKeys=[0, 1, 2, 3, 4, 5, 6, 7, 8, 9])

const { MilvusClient, DataType } = require("@zilliz/milvus2-sdk-node")

const address = "http://localhost:19530";
const token = "root:Milvus";
const client = new MilvusClient({address, token});

// 3. Insert some data

var data = [
    {id: 0, vector: [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], color: "pink_8682"},
    {id: 1, vector: [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], color: "red_7025"},
    {id: 2, vector: [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], color: "orange_6781"},
    {id: 3, vector: [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], color: "pink_9298"},
    {id: 4, vector: [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], color: "red_4794"},
    {id: 5, vector: [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], color: "yellow_4222"},
    {id: 6, vector: [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], color: "red_9392"},
    {id: 7, vector: [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], color: "grey_8510"},
    {id: 8, vector: [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], color: "white_9381"},
    {id: 9, vector: [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], color: "purple_4976"}        
]

var res = await client.insert({
    collection_name: "quick_setup",
    data: data,
})

console.log(res.insert_cnt)

// Output
// 
// 10
// 

export CLUSTER_ENDPOINT="http://localhost:19530"
export TOKEN="root:Milvus"

curl --request POST \
--url "${CLUSTER_ENDPOINT}/v2/vectordb/entities/insert" \
--header "Authorization: Bearer ${TOKEN}" \
--header "Content-Type: application/json" \
-d '{
    "data": [
        {"id": 0, "vector": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], "color": "pink_8682"},
        {"id": 1, "vector": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], "color": "red_7025"},
        {"id": 2, "vector": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], "color": "orange_6781"},
        {"id": 3, "vector": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], "color": "pink_9298"},
        {"id": 4, "vector": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], "color": "red_4794"},
        {"id": 5, "vector": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], "color": "yellow_4222"},
        {"id": 6, "vector": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], "color": "red_9392"},
        {"id": 7, "vector": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], "color": "grey_8510"},
        {"id": 8, "vector": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], "color": "white_9381"},
        {"id": 9, "vector": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], "color": "purple_4976"}        
    ],
    "collectionName": "quick_setup"
}'

# {
#     "code": 0,
#     "data": {
#         "insertCount": 10,
#         "insertIds": [
#             0,
#             1,
#             2,
#             3,
#             4,
#             5,
#             6,
#             7,
#             8,
#             9
#         ]
#     }
# }

파티션에 엔티티 삽입

지정된 파티션에 엔티티를 삽입할 수도 있습니다. 다음 코드 조각은 컬렉션에 PartitionA라는 파티션이 있다고 가정합니다.

data=[
    {"id": 10, "vector": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], "color": "pink_8682"},
    {"id": 11, "vector": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], "color": "red_7025"},
    {"id": 12, "vector": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], "color": "orange_6781"},
    {"id": 13, "vector": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], "color": "pink_9298"},
    {"id": 14, "vector": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], "color": "red_4794"},
    {"id": 15, "vector": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], "color": "yellow_4222"},
    {"id": 16, "vector": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], "color": "red_9392"},
    {"id": 17, "vector": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], "color": "grey_8510"},
    {"id": 18, "vector": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], "color": "white_9381"},
    {"id": 19, "vector": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], "color": "purple_4976"}
]

res = client.insert(
    collection_name="quick_setup",
    # highlight-next-line
    partition_name="partitionA",
    data=data
)

print(res)

# Output
# {'insert_count': 10, 'ids': [10, 11, 12, 13, 14, 15, 16, 17, 18, 19]}

import com.google.gson.Gson;
import com.google.gson.JsonObject;
import io.milvus.v2.service.vector.request.InsertReq;
import io.milvus.v2.service.vector.response.InsertResp;

import java.util.*;

Gson gson = new Gson();
List<JsonObject> data = Arrays.asList(
        gson.fromJson("{\"id\": 10, \"vector\": [0.3580376395471989f, -0.6023495712049978f, 0.18414012509913835f, -0.26286205330961354f, 0.9029438446296592f], \"color\": \"pink_8682\"}", JsonObject.class),
        gson.fromJson("{\"id\": 11, \"vector\": [0.19886812562848388f, 0.06023560599112088f, 0.6976963061752597f, 0.2614474506242501f, 0.838729485096104f], \"color\": \"red_7025\"}", JsonObject.class),
        gson.fromJson("{\"id\": 12, \"vector\": [0.43742130801983836f, -0.5597502546264526f, 0.6457887650909682f, 0.7894058910881185f, 0.20785793220625592f], \"color\": \"orange_6781\"}", JsonObject.class),
        gson.fromJson("{\"id\": 13, \"vector\": [0.3172005263489739f, 0.9719044792798428f, -0.36981146090600725f, -0.4860894583077995f, 0.95791889146345f], \"color\": \"pink_9298\"}", JsonObject.class),
        gson.fromJson("{\"id\": 14, \"vector\": [0.4452349528804562f, -0.8757026943054742f, 0.8220779437047674f, 0.46406290649483184f, 0.30337481143159106f], \"color\": \"red_4794\"}", JsonObject.class),
        gson.fromJson("{\"id\": 15, \"vector\": [0.985825131989184f, -0.8144651566660419f, 0.6299267002202009f, 0.1206906911183383f, -0.1446277761879955f], \"color\": \"yellow_4222\"}", JsonObject.class),
        gson.fromJson("{\"id\": 16, \"vector\": [0.8371977790571115f, -0.015764369584852833f, -0.31062937026679327f, -0.562666951622192f, -0.8984947637863987f], \"color\": \"red_9392\"}", JsonObject.class),
        gson.fromJson("{\"id\": 17, \"vector\": [-0.33445148015177995f, -0.2567135004164067f, 0.8987539745369246f, 0.9402995886420709f, 0.5378064918413052f], \"color\": \"grey_8510\"}", JsonObject.class),
        gson.fromJson("{\"id\": 18, \"vector\": [0.39524717779832685f, 0.4000257286739164f, -0.5890507376891594f, -0.8650502298996872f, -0.6140360785406336f], \"color\": \"white_9381\"}", JsonObject.class),
        gson.fromJson("{\"id\": 19, \"vector\": [0.5718280481994695f, 0.24070317428066512f, -0.3737913482606834f, -0.06726932177492717f, -0.6980531615588608f], \"color\": \"purple_4976\"}", JsonObject.class)
);

InsertReq insertReq = InsertReq.builder()
        .collectionName("quick_setup")
        .partitionName("partitionA")
        .data(data)
        .build();

InsertResp insertResp = client.insert(insertReq);
System.out.println(insertResp);

// Output:
//
// InsertResp(InsertCnt=10, primaryKeys=[10, 11, 12, 13, 14, 15, 16, 17, 18, 19])

const { MilvusClient, DataType } = require("@zilliz/milvus2-sdk-node")

// 3. Insert some data

var data = [
    {id: 10, vector: [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], color: "pink_8682"},
    {id: 11, vector: [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], color: "red_7025"},
    {id: 12, vector: [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], color: "orange_6781"},
    {id: 13, vector: [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], color: "pink_9298"},
    {id: 14, vector: [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], color: "red_4794"},
    {id: 15, vector: [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], color: "yellow_4222"},
    {id: 16, vector: [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], color: "red_9392"},
    {id: 17, vector: [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], color: "grey_8510"},
    {id: 18, vector: [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], color: "white_9381"},
    {id: 19, vector: [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], color: "purple_4976"}        
]

var res = await client.insert({
    collection_name: "quick_setup",
    // highlight-next-line
    partition_name: "partitionA",
    data: data,
})

console.log(res.insert_cnt)

// Output
// 
// 10
// 

export CLUSTER_ENDPOINT="http://localhost:19530"
export TOKEN="root:Milvus"

curl --request POST \
--url "${CLUSTER_ENDPOINT}/v2/vectordb/entities/insert" \
--header "Authorization: Bearer ${TOKEN}" \
--header "Content-Type: application/json" \
-d '{
    "data": [
        {"id": 10, "vector": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], "color": "pink_8682"},
        {"id": 11, "vector": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], "color": "red_7025"},
        {"id": 12, "vector": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], "color": "orange_6781"},
        {"id": 13, "vector": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], "color": "pink_9298"},
        {"id": 14, "vector": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], "color": "red_4794"},
        {"id": 15, "vector": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], "color": "yellow_4222"},
        {"id": 16, "vector": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], "color": "red_9392"},
        {"id": 17, "vector": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], "color": "grey_8510"},
        {"id": 18, "vector": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], "color": "white_9381"},
        {"id": 19, "vector": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], "color": "purple_4976"}        
    ],
    "collectionName": "quick_setup",
    "partitionName": "partitionA"
}'

# {
#     "code": 0,
#     "data": {
#         "insertCount": 10,
#         "insertIds": [
#             10,
#             11,
#             12,
#             13,
#             14,
#             15,
#             16,
#             17,
#             18,
#             19
#         ]
#     }
# }