About Milvus
Get Started
Concepts
User Guide
Models
Milvus Migration
Administration Guide
Tools
Integrations
Tutorials
FAQs
API Reference

(Deprecated) Deploy a Milvus Cluster on EC2

This topic describes how to deploy a Milvus cluster on Amazon EC2 with Terraform and Ansible.

This topic is outdated and will be removed soon. You are advised to refer to Deploy a Milvus Cluster on EKS instead.

Provision a Milvus cluster

This section describes how to use Terraform to provision a Milvus cluster.

Terraform is an infrastructure as code (IaC) software tool. With Terraform, you can provision infrastructure by using declarative configuration files.

Prerequisites

Install and configure Terraform
Install and configure AWS CLI

Prepare configuration

You can download template configuration files at Google Drive.

main.tf

This file contains the configuration for provisioning a Milvus cluster.
variables.tf

This file allows quick editing of variables used to set up or update a Milvus cluster.
output.tf and inventory.tmpl

These files store the metadata of a Milvus cluster. The metadata used in this topic is the public_ip for each node instance, private_ip for each node instance, and all EC2 instance IDs.

Prepare variables.tf

This section describes the configuration that a variables.tf file that contains.

Number of nodes

The following template declares an index_count variable used to set the number of index nodes.

The value of index_count must be greater than or equal to one.
```
variable "index_count" {
  description = "Amount of index instances to run"
  type        = number
  default     = 5
}
```

Instance type for a node type

The following template declares an index_ec2_type variable used to set the instance type for index nodes.

variable "index_ec2_type" {
  description = "Which server type"
  type        = string
  default     = "c5.2xlarge"
}

Access permission

The following template declares a key_name variable and a my_ip variable. The key_name variable represents the AWS access key. The my_ip variable represents the IP address range for a security group.

variable "key_name" {
  description = "Which aws key to use for access into instances, needs to be uploaded already"
  type        = string
  default     = ""
}

variable "my_ip" {
  description = "my_ip for security group. used so that ansible and terraform can ssh in"
  type        = string
  default     = "x.x.x.x/32"
}

Prepare main.tf

This section describes the configurations that a main.tf file that contains.

Cloud provider and region

The following template uses the us-east-2 region. See Available Regions for more information.
```
provider "aws" {
  profile = "default"
  region  = "us-east-2"
}
```

Security group

The following template declares a security group that allows incoming traffic from the CIDR address range represented by my_ip declared in variables.tf.

resource "aws_security_group" "cluster_sg" {
  name        = "cluster_sg"
  description = "Allows only me to access"
  vpc_id      = aws_vpc.cluster_vpc.id

  ingress {
    description      = "All ports from my IP"
    from_port        = 0
    to_port          = 65535
    protocol         = "tcp"
    cidr_blocks      = [var.my_ip]
  }

  ingress {
    description      = "Full subnet communication"
    from_port        = 0
    to_port          = 65535
    protocol         = "all"
    self             = true
  }

  egress {
    from_port        = 0
    to_port          = 0
    protocol         = "-1"
    cidr_blocks      = ["0.0.0.0/0"]
    ipv6_cidr_blocks = ["::/0"]
  }

  tags = {
    Name = "cluster_sg"
  }
}

VPC

The following template specifies a VPC with the 10.0.0.0/24 CIDR block on a Milvus cluster.

resource "aws_vpc" "cluster_vpc" {
  cidr_block = "10.0.0.0/24"
  tags = {
    Name = "cluster_vpc"
  }
}

resource "aws_internet_gateway" "cluster_gateway" {
  vpc_id = aws_vpc.cluster_vpc.id

  tags = {
    Name = "cluster_gateway"
  }
}

Subnets (Optional)

The following template declares a subnet whose traffic is routed to an internet gateway. In this case, the size of the subnet’s CIDR block is the same as the VPC’s CIDR block.

resource "aws_subnet" "cluster_subnet" {
  vpc_id                  = aws_vpc.cluster_vpc.id
  cidr_block              = "10.0.0.0/24"
  map_public_ip_on_launch = true

  tags = {
    Name = "cluster_subnet"
  }
}

resource "aws_route_table" "cluster_subnet_gateway_route" {
  vpc_id       = aws_vpc.cluster_vpc.id

  route {
    cidr_block = "0.0.0.0/0"
    gateway_id = aws_internet_gateway.cluster_gateway.id
  }

  tags = {
    Name = "cluster_subnet_gateway_route"
  }
}

resource "aws_route_table_association" "cluster_subnet_add_gateway" {
  subnet_id      = aws_subnet.cluster_subnet.id
  route_table_id = aws_route_table.cluster_subnet_gateway_route.id
}

Node instances (Nodes)

The following template declares a MinIO node instance. The main.tf template file declares nodes of 11 node types. For some node types, you need to set root_block_device. See EBS, Ephemeral, and Root Block Devices for more information.

resource "aws_instance" "minio_node" {
  count         = var.minio_count
  ami           = "ami-0d8d212151031f51c"
  instance_type = var.minio_ec2_type
  key_name      = var.key_name
  subnet_id     = aws_subnet.cluster_subnet.id 
  vpc_security_group_ids = [aws_security_group.cluster_sg.id]

  root_block_device {
    volume_type = "gp2"
    volume_size = 1000
  }
  
  tags = {
    Name = "minio-${count.index + 1}"
  }
}

Apply the configuration

Open a terminal and navigate to the folder that stores main.tf.
To initialize the configuration, run terraform init.
To apply the configuration, run terraform apply and enter yes when prompted.

You have now provisioned a Milvus cluster with Terraform.

Start the Milvus cluster

This section describes how to use Ansible to start the Milvus cluster that you have provisioned.

Ansible is a configuration management tool used to automate cloud provisioning and configuration management.

Prerequisites

Ansible Controller is installed.

Download Ansible Milvus node deployment Playbook

Clone Milvus repository from GitHub to download the Ansible Milvus node deployment Playbook.

git clone https://github.com/milvus-io/milvus.git

Configure installation files

The inventory.ini and ansible.cfg files are used to control the environment variables and log-in verification methods in Ansible playbook. In the inventory.ini file, the dockernodes section defines all the servers of docker engines. The ansible.cfg section defines all the servers of Milvus coordinators. The node section defines all the servers of Milvus nodes.

Enter the local path to the Playbook and configure the installation files.

$ cd ./milvus/deployments/docker/cluster-distributed-deployment

`inventory.ini`

Configure inventory.ini to divide hosts in groups in accordance with their roles in the Milvus system.

Add host names, and define docker group and vars.

[dockernodes] #Add docker host names.
dockernode01
dockernode02
dockernode03

[admin] #Add Ansible controller name.
ansible-controller

[coords] #Add the host names of Milvus coordinators.
; Take note the IP of this host VM, and replace 10.170.0.17 with it.
dockernode01

[nodes] #Add the host names of Milvus nodes.
dockernode02

[dependencies] #Add the host names of Milvus dependencies.
; dependencies node will host etcd, minio, pulsar, these 3 roles are the foundation of Milvus. 
; Take note the IP of this host VM, and replace 10.170.0.19 with it.
dockernode03

[docker:children]
dockernodes
coords
nodes
dependencies

[docker:vars]
ansible_python_interpreter= /usr/bin/python3
StrictHostKeyChecking= no

; Setup variables to control what type of network to use when creating containers.
dependencies_network= host
nodes_network= host

; Setup varibale to control what version of Milvus image to use.
image= milvusdb/milvus-dev:master-20220412-4781db8a

; Setup static IP addresses of the docker hosts as variable for container environment variable config.
; Before running the playbook, below 4 IP addresses need to be replaced with the IP of your host VM
; on which the etcd, minio, pulsar, coordinators will be hosted.
etcd_ip= 10.170.0.19
minio_ip= 10.170.0.19
pulsar_ip= 10.170.0.19
coords_ip= 10.170.0.17

; Setup container environment which later will be used in container creation.
ETCD_ENDPOINTS= {{etcd_ip}}:2379 
MINIO_ADDRESS= {{minio_ip}}:9000
PULSAR_ADDRESS= pulsar://{{pulsar_ip}}:6650
QUERY_COORD_ADDRESS= {{coords_ip}}:19531
DATA_COORD_ADDRESS= {{coords_ip}}:13333
ROOT_COORD_ADDRESS= {{coords_ip}}:53100
INDEX_COORD_ADDRESS= {{coords_ip}}:31000

`ansible.cfg`

ansible.cfg controls the action of the playbook, for example, SSH key, etc. Do not set up passphrase via the SSH key on docker hosts. Otherwise, the Ansible SSH connection will fail. We recommend setting up the same username and SSH key on the three hosts and setting up the new user account to execute sudo without a password. Otherwise, you will receive errors that the user name does not match the password or you are not granted elevated privileges when running Ansible playbook.

[defaults]
host_key_checking = False
inventory = inventory.ini # Specify the Inventory file
private_key_file=~/.my_ssh_keys/gpc_sshkey # Specify the SSH key that Ansible uses to access Docker host

`deploy-docker.yml`

deploy-docker.yml defines the tasks during the installation of Docker. See the code comments in the file for details.

---
- name: setup pre-requisites # Install prerequisite
  hosts: all
  become: yes
  become_user: root
  roles:
    - install-modules
    - configure-hosts-file

- name: install docker
  become: yes
  become_user: root
  hosts: dockernodes
  roles:
    - docker-installation

Test Ansible connectivity

Test the connectivity to Ansible.

$ ansible all -m ping

Add -i in the command to specify the path to the inventory file if you did not specify it in ansible.cfg, otherwise Ansible uses /etc/ansible/hosts.

The terminal returns as follow:

dockernode01 | SUCCESS => {
"changed": false,
"ping": "pong"
}
ansible-controller | SUCCESS => {
    "ansible_facts": {
        "discovered_interpreter_python": "/usr/bin/python3"
    },
    "changed": false,
    "ping": "pong"
}
dockernode03 | SUCCESS => {
    "changed": false,
    "ping": "pong"
}
dockernode02 | SUCCESS => {
    "changed": false,
    "ping": "pong"
}

Check the Playbook Syntax

Check the syntax of the Playbook.

$ ansible-playbook deploy-docker.yml --syntax-check

Normally, the terminal returns as follow:

playbook: deploy-docker.yml

Install Docker

Install Docker with the Playbook.

$ ansible-playbook deploy-docker.yml

If Docker is successfully installed on the three hosts, the terminal returns as follow:

TASK [docker-installation : Install Docker-CE] *******************************************************************
ok: [dockernode01]
ok: [dockernode03]
ok: [dockernode02]

TASK [docker-installation : Install python3-docker] **************************************************************
ok: [dockernode01]
ok: [dockernode02]
ok: [dockernode03]

TASK [docker-installation : Install docker-compose python3 library] **********************************************
changed: [dockernode01]
changed: [dockernode03]
changed: [dockernode02]

PLAY RECAP *******************************************************************************************************
ansible-controller         : ok=3    changed=0    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0
dockernode01               : ok=10   changed=1    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0
dockernode02               : ok=10   changed=1    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0
dockernode03               : ok=10   changed=1    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0

Verify the installation

For root host:

$ docker -v

For non-root hosts:

$ sudo docker -v

Normally, the terminal returns as follow:

Docker version 20.10.14, build a224086

Check the running status of the containers.

$ docker ps

Check the Syntax

Check the Syntax of deploy-milvus.yml.

$ ansible-playbook deploy-milvus.yml --syntax-check

Normally, the terminal returns as follow:

playbook: deploy-milvus.yml

Create Milvus container

The tasks to create Milvus container are defined in deploy-milvus.yml.

$ ansible-playbook deploy-milvus.yml

The terminal returns:

PLAY [Create milvus-etcd, minio, pulsar] *****************************************************************

TASK [Gathering Facts] ********************************************************************************************
ok: [dockernode03]

TASK [etcd] *******************************************************************************************************
changed: [dockernode03]

TASK [pulsar] *****************************************************************************************************
changed: [dockernode03]

TASK [minio] ******************************************************************************************************
changed: [dockernode03]

PLAY [Create milvus nodes] ****************************************************************************************

TASK [Gathering Facts] ********************************************************************************************
ok: [dockernode02]

TASK [querynode] **************************************************************************************************
changed: [dockernode02]

TASK [datanode] ***************************************************************************************************
changed: [dockernode02]

TASK [indexnode] **************************************************************************************************
changed: [dockernode02]

PLAY [Create milvus coords] ***************************************************************************************

TASK [Gathering Facts] ********************************************************************************************
ok: [dockernode01]

TASK [rootcoord] **************************************************************************************************
changed: [dockernode01]

TASK [datacoord] **************************************************************************************************
changed: [dockernode01]

TASK [querycoord] *************************************************************************************************
changed: [dockernode01]

TASK [indexcoord] *************************************************************************************************
changed: [dockernode01]

TASK [proxy] ******************************************************************************************************
changed: [dockernode01]

PLAY RECAP ********************************************************************************************************
dockernode01               : ok=6    changed=5    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0
dockernode02               : ok=4    changed=3    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0
dockernode03               : ok=4    changed=3    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0

Now you have Milvus deployed on the three hosts.

Stop nodes

You can stop all nodes after you do not need a Milvus cluster any longer.

Ensure that the terraform binary is available on your PATH.

Run terraform destroy and enter yes when prompted.
If successful, all node instances are stopped.

What’s next

If you want to learn how to deploy Milvus on other clouds:

(Deprecated) Deploy a Milvus Cluster on EC2
Provision a Milvus cluster
Start the Milvus cluster
Stop nodes
What's next

Try Managed Milvus for Free

Zilliz Cloud is hassle-free, powered by Milvus and 10x faster.

Get Started

Feedback

Was this page helpful?

(Deprecated) Deploy a Milvus Cluster on EC2

Provision a Milvus cluster

Prerequisites

Prepare configuration

Prepare variables.tf

Prepare main.tf

Apply the configuration

Start the Milvus cluster

Prerequisites

Download Ansible Milvus node deployment Playbook

Configure installation files

inventory.ini

ansible.cfg

deploy-docker.yml

Test Ansible connectivity

Check the Playbook Syntax

Install Docker

Verify the installation

Check the Syntax

Create Milvus container

Stop nodes

What’s next

Table of contents

Try Managed Milvus for Free

Feedback

`inventory.ini`

`ansible.cfg`

`deploy-docker.yml`