In-memory Index
This topic lists various types of in-memory indexes Milvus supports, scenarios each of them best suits, and parameters users can configure to achieve better search performance. For on-disk indexes, see On-disk Index.
Indexing is the process of efficiently organizing data, and it plays a major role in making similarity search useful by dramatically accelerating time-consuming queries on large datasets.
To improve query performance, you can specify an index type for each vector field.
ANNS vector indexes
Most of the vector index types supported by Milvus use approximate nearest neighbors search (ANNS) algorithms. Compared with accurate retrieval, which is usually very time-consuming, the core idea of ANNS is no longer limited to returning the most accurate result, but only searching for neighbors of the target. ANNS improves retrieval efficiency by sacrificing accuracy within an acceptable range.
According to the implementation methods, the ANNS vector index can be categorized into four types: Tree-based, Graph-based, Hash-based, and Quantization-based.
Indexes supported in Milvus
Milvus supports various index types, which are categorized by the type of embedding they handle: floating-point, binary, and sparse.
Indexes for floating-point embeddings
For 128-dimensional floating-point embeddings, the storage they take up is 128 * the size of float = 512 bytes. And the distance metrics used for float-point embeddings are Euclidean distance (L2) and Inner product (IP).
These types of indexes include FLAT, IVF_FLAT, IVF_PQ, IVF_SQ8, HNSW, and SCANN for CPU-based ANN searches.
Indexes for binary embeddings
For 128-dimensional binary embeddings, the storage they take up is 128 / 8 = 16 bytes. And the distance metrics used for binary embeddings are JACCARD and HAMMING.
This type of indexes include BIN_FLAT and BIN_IVF_FLAT.
Indexes for sparse embeddings
The distance metric supported for sparse embeddings is IP only.
The types of indexes include SPARSE_INVERTED_INDEX and SPARSE_WAND.
| Supported index | Classification | Scenario |
|---|---|---|
| FLAT | N/A |
|
| IVF_FLAT | Quantization-based index |
|
| IVF_SQ8 | Quantization-based index |
|
| IVF_PQ | Quantization-based index |
|
| HNSW | Graph-based index |
|
| SCANN | Quantization-based index |
|
| Supported index | Classification | Scenario |
|---|---|---|
| BIN_FLAT | Quantization-based index |
|
| BIN_IVF_FLAT | Quantization-based index |
|
| Supported index | Classification | Scenario |
|---|---|---|
| SPARSE_INVERTED_INDEX | Inverted index |
|
| SPARSE_WAND | Inverted index |
|
FLAT
For vector similarity search applications that require perfect accuracy and depend on relatively small (million-scale) datasets, the FLAT index is a good choice. FLAT does not compress vectors, and is the only index that can guarantee exact search results. Results from FLAT can also be used as a point of comparison for results produced by other indexes that have less than 100% recall.
FLAT is accurate because it takes an exhaustive approach to search, which means for each query the target input is compared to every set of vectors in a dataset. This makes FLAT the slowest index on our list, and poorly suited for querying massive vector data. There are no parameters required for the FLAT index in Milvus, and using it does not need data training.
Search parameters
Parameter Description Range metric_type[Optional] The chosen distance metric. See Supported Metrics.
IVF_FLAT
IVF_FLAT divides vector data into nlist cluster units, and then compares distances between the target input vector and the center of each cluster. Depending on the number of clusters the system is set to query (nprobe), similarity search results are returned based on comparisons between the target input and the vectors in the most similar cluster(s) only — drastically reducing query time.
By adjusting nprobe, an ideal balance between accuracy and speed can be found for a given scenario. Results from the IVF_FLAT performance test demonstrate that query time increases sharply as both the number of target input vectors (nq), and the number of clusters to search (nprobe), increase.
IVF_FLAT is the most basic IVF index, and the encoded data stored in each unit is consistent with the original data.
Index building parameters
Parameter Description Range Default Value nlistNumber of cluster units [1, 65536] 128 Search parameters
Common search
Parameter Description Range Default Value nprobeNumber of units to query [1, nlist] 8 Range search
Parameter Description Range Default Value max_empty_result_bucketsMaximum number of buckets not returning any search results.
This is a range-search parameter and terminates the search process whilst the number of consecutive empty buckets reaches the specified value.
Increasing this value can improve recall rate at the cost of increased search time.[1, 65535] 2
IVF_SQ8
IVF_FLAT does not perform any compression, so the index files it produces are roughly the same size as the original, raw non-indexed vector data. For example, if the original 1B SIFT dataset is 476 GB, its IVF_FLAT index files will be slightly smaller (~470 GB). Loading all the index files into memory will consume 470 GB of storage.
When disk, CPU, or GPU memory resources are limited, IVF_SQ8 is a better option than IVF_FLAT. This index type can convert each FLOAT (4 bytes) to UINT8 (1 byte) by performing Scalar Quantization (SQ). This reduces disk, CPU, and GPU memory consumption by 70–75%. For the 1B SIFT dataset, the IVF_SQ8 index files require just 140 GB of storage.
Index building parameters
Parameter Description Range nlistNumber of cluster units [1, 65536] Search parameters
Common search
Parameter Description Range Default Value nprobeNumber of units to query [1, nlist] 8 Range search
Parameter Description Range Default Value max_empty_result_bucketsMaximum number of buckets not returning any search results.
This is a range-search parameter and terminates the search process whilst the number of consecutive empty buckets reaches the specified value.
Increasing this value can improve recall rate at the cost of increased search time.[1, 65535] 2
IVF_PQ
PQ (Product Quantization) uniformly decomposes the original high-dimensional vector space into Cartesian products of m low-dimensional vector spaces, and then quantizes the decomposed low-dimensional vector spaces. Instead of calculating the distances between the target vector and the center of all the units, product quantization enables the calculation of distances between the target vector and the clustering center of each low-dimensional space and greatly reduces the time complexity and space complexity of the algorithm.
IVF_PQ performs IVF index clustering before quantizing the product of vectors. Its index file is even smaller than IVF_SQ8, but it also causes a loss of accuracy during searching vectors.
Index building parameters and search parameters vary with Milvus distribution. Select your Milvus distribution first.
Index building parameters
Parameter Description Range nlistNumber of cluster units [1, 65536] mNumber of factors of product quantization dim mod m == 0nbits[Optional] Number of bits in which each low-dimensional vector is stored. [1, 64] (8 by default) Search parameters
Common search
Parameter Description Range Default Value nprobeNumber of units to query [1, nlist] 8 Range search
Parameter Description Range Default Value max_empty_result_bucketsMaximum number of buckets not returning any search results.
This is a range-search parameter and terminates the search process whilst the number of consecutive empty buckets reaches the specified value.
Increasing this value can improve recall rate at the cost of increased search time.[1, 65535] 2
SCANN
ScaNN (Scalable Nearest Neighbors) is similar to IVF_PQ in terms of vector clustering and product quantization. What makes them different lies in the implementation details of product quantization and the use of SIMD (Single-Instruction / Multi-data) for efficient calculation.
Index building parameters
Parameter Description Range nlistNumber of cluster units [1, 65536] with_raw_dataWhether to include the raw data in the index TrueorFalse. Defaults toTrue.Unlike IVF_PQ, default values apply to
mandnbitsfor optimized performance.Search parameters
Common search
Parameter Description Range Default value nprobeNumber of units to query [1, nlist] reorder_kNumber of candidate units to query [ top_k, ∞]top_kRange search
Parameter Description Range Default Value max_empty_result_bucketsMaximum number of buckets not returning any search results.
This is a range-search parameter and terminates the search process whilst the number of consecutive empty buckets reaches the specified value.
Increasing this value can improve recall rate at the cost of increased search time.[1, 65535] 2
HNSW
HNSW (Hierarchical Navigable Small World Graph) is a graph-based indexing algorithm. It builds a multi-layer navigation structure for an image according to certain rules. In this structure, the upper layers are more sparse and the distances between nodes are farther; the lower layers are denser and the distances between nodes are closer. The search starts from the uppermost layer, finds the node closest to the target in this layer, and then enters the next layer to begin another search. After multiple iterations, it can quickly approach the target position.
In order to improve performance, HNSW limits the maximum degree of nodes on each layer of the graph to M. In addition, you can use efConstruction (when building index) or ef (when searching targets) to specify a search range.
Index building parameters
Parameter Description Range MM defines tha maximum number of outgoing connections in the graph. Higher M leads to higher accuracy/run_time at fixed ef/efConstruction. [2, 2048] efConstructionef_construction controls index search speed/build speed tradeoff. Increasing the efConstruction parameter may enhance index quality, but it also tends to lengthen the indexing time. [1, int_max] Search parameters
Parameter Description Range efParameter controlling query time/accuracy trade-off. Higher efleads to more accurate but slower search.[ top_k, int_max]
BIN_FLAT
This index is exactly the same as FLAT except that this can only be used for binary embeddings.
For vector similarity search applications that require perfect accuracy and depend on relatively small (million-scale) datasets, the BIN_FLAT index is a good choice. BIN_FLAT does not compress vectors, and is the only index that can guarantee exact search results. Results from BIN_FLAT can also be used as a point of comparison for results produced by other indexes that have less than 100% recall.
BIN_FLAT is accurate because it takes an exhaustive approach to search, which means for each query the target input is compared to vectors in a dataset. This makes BIN_FLAT the slowest index on our list, and poorly suited for querying massive vector data. There are no parameters for the BIN_FLAT index in Milvus, and using it does not require data training or additional storage.
Search parameters
Parameter Description Range metric_type[Optional] The chosen distance metric. See Supported Metrics.
BIN_IVF_FLAT
This index is exactly the same as IVF_FLAT except that this can only be used for binary embeddings.
BIN_IVF_FLAT divides vector data into nlist cluster units, and then compares distances between the target input vector and the center of each cluster. Depending on the number of clusters the system is set to query (nprobe), similarity search results are returned based on comparisons between the target input and the vectors in the most similar cluster(s) only — drastically reducing query time.
By adjusting nprobe, an ideal balance between accuracy and speed can be found for a given scenario. Query time increases sharply as both the number of target input vectors (nq), and the number of clusters to search (nprobe), increase.
BIN_IVF_FLAT is the most basic BIN_IVF index, and the encoded data stored in each unit is consistent with the original data.
Index building parameters
Parameter Description Range nlistNumber of cluster units [1, 65536] Search parameters
Common search
Parameter Description Range Default Value nprobeNumber of units to query [1, nlist] 8 Range search
Parameter Description Range Default Value max_empty_result_bucketsMaximum number of buckets not returning any search results.
This is a range-search parameter and terminates the search process whilst the number of consecutive empty buckets reaches the specified value.
Increasing this value can improve recall rate at the cost of increased search time.[1, 65535] 2
SPARSE_INVERTED_INDEX
Each dimension maintains a list of vectors that have a non-zero value at that dimension. During search, Milvus iterates through each dimension of the query vector and computes scores for vectors that have non-zero values in those dimensions.
Index building parameters
Parameter Description Range drop_ratio_buildThe proportion of small vector values that are excluded during the indexing process. This option allows fine-tuning of the indexing process, making a trade-off between efficiency and accuracy by disregarding small values when building the index. [0, 1] Search parameters
Parameter Description Range drop_ratio_searchThe proportion of small vector values that are excluded during the search process. This option allows fine-tuning of the search process by specifying the ratio of the smallest values in the query vector to ignore. It helps balance search precision and performance. The smaller the value set for drop_ratio_search, the less these small values contribute to the final score. By ignoring some small values, search performance can be improved with minimal impact on accuracy.[0, 1]
SPARSE_WAND
This index shares similarities with SPARSE_INVERTED_INDEX, while it utilizes the Weak-AND algorithm to further reduce the number of full IP distance evaluations during the search process.
Based on our testing, SPARSE_WAND generally outperforms other methods in terms of speed. However, its performance can deteriorate rapidly as the density of the vectors increases. To address this issue, introducing a non-zero drop_ratio_search can significantly enhance performance while only incurring minimal accuracy loss. For more information, refer to Sparse Vector.
Index building parameters
Parameter Description Range drop_ratio_buildThe proportion of small vector values that are excluded during the indexing process. This option allows fine-tuning of the indexing process, making a trade-off between efficiency and accuracy by disregarding small values when building the index. [0, 1] Search parameters
Parameter Description Range drop_ratio_searchThe proportion of small vector values that are excluded during the search process. This option allows fine-tuning of the search process by specifying the ratio of the smallest values in the query vector to ignore. It helps balance search precision and performance. The smaller the value set for drop_ratio_search, the less these small values contribute to the final score. By ignoring some small values, search performance can be improved with minimal impact on accuracy.[0, 1]
FAQ
What is the difference between FLAT index and IVF_FLAT index?
IVF_FLAT index divides a vector space into nlist clusters. If you keep the default value of nlist as 16384, Milvus compares the distances between the target vector and the centers of all 16384 clusters to get nprobe nearest clusters. Then Milvus compares the distances between the target vector and the vectors in the selected clusters to get the nearest vectors. Unlike IVF_FLAT, FLAT directly compares the distances between the target vector and each and every vector.
Therefore, when the total number of vectors approximately equals nlist, IVF_FLAT and FLAT has little difference in the way of calculation required and search performance. But as the number of vectors grows to two times, three times, or n times of nlist, IVF_FLAT index begins to show increasingly greater advantages.
See How to Choose an Index in Milvus for more information.
What’s next
- Learn more about the Similarity Metrics supported in Milvus.