Insérer des entités

Les entités d'une collection sont des enregistrements de données qui partagent le même ensemble de champs. Les valeurs des champs de chaque enregistrement de données forment une entité. Cette page explique comment insérer des entités dans une collection.

Vue d'ensemble

Dans Milvus, une entité fait référence aux enregistrements de données d'une collection qui partagent le même schéma, les données de chaque champ d'une ligne constituant une entité. Par conséquent, les entités d'une même collection ont les mêmes attributs (noms de champs, types de données et autres contraintes).

Lors de l'insertion d'une entité dans une collection, l'entité à insérer ne peut être ajoutée avec succès que si elle contient tous les champs définis dans le schéma. L'entité insérée entrera dans une partition nommée _default dans l'ordre d'insertion. Si une certaine partition existe, vous pouvez également insérer des entités dans cette partition en spécifiant le nom de la partition dans la demande d'insertion.

Milvus prend également en charge les champs dynamiques pour maintenir l'évolutivité de la collection. Lorsque le champ dynamique est activé, vous pouvez insérer dans la collection des champs qui ne sont pas définis dans le schéma. Ces champs et valeurs seront stockés sous forme de paires clé-valeur dans un champ réservé appelé $meta. Pour plus d'informations sur les champs dynamiques, veuillez vous référer à Champ dynamique.

Insérer des entités dans une collection

Avant d'insérer des données, vous devez organiser vos données dans une liste de dictionnaires conformément au schéma, chaque dictionnaire représentant une entité et contenant tous les champs définis dans le schéma. Si le champ dynamique est activé dans la collection, chaque dictionnaire peut également inclure des champs qui ne sont pas définis dans le schéma.

Dans cette section, vous allez insérer des entités dans une collection créée de manière rapide. Une collection créée de cette manière ne comporte que deux champs, nommés id et vector. En outre, cette Collection a activé le champ dynamique, de sorte que les Entités dans le code d'exemple incluent un champ appelé **color **qui n'est pas défini dans le schéma.

from pymilvus import MilvusClient

client = MilvusClient(
    uri="http://localhost:19530",
    token="root:Milvus"
)

data=[
    {"id": 0, "vector": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], "color": "pink_8682"},
    {"id": 1, "vector": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], "color": "red_7025"},
    {"id": 2, "vector": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], "color": "orange_6781"},
    {"id": 3, "vector": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], "color": "pink_9298"},
    {"id": 4, "vector": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], "color": "red_4794"},
    {"id": 5, "vector": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], "color": "yellow_4222"},
    {"id": 6, "vector": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], "color": "red_9392"},
    {"id": 7, "vector": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], "color": "grey_8510"},
    {"id": 8, "vector": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], "color": "white_9381"},
    {"id": 9, "vector": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], "color": "purple_4976"}
]

res = client.insert(
    collection_name="quick_setup",
    data=data
)

print(res)

# Output
# {'insert_count': 10, 'ids': [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]}

import com.google.gson.Gson;
import com.google.gson.JsonObject;
import io.milvus.v2.client.ConnectConfig;
import io.milvus.v2.client.MilvusClientV2;
import io.milvus.v2.service.vector.request.InsertReq;
import io.milvus.v2.service.vector.response.InsertResp;

import java.util.*;

MilvusClientV2 client = new MilvusClientV2(ConnectConfig.builder()
        .uri("http://localhost:19530")
        .token("root:Milvus")
        .build());

Gson gson = new Gson();
List<JsonObject> data = Arrays.asList(
        gson.fromJson("{\"id\": 0, \"vector\": [0.3580376395471989f, -0.6023495712049978f, 0.18414012509913835f, -0.26286205330961354f, 0.9029438446296592f], \"color\": \"pink_8682\"}", JsonObject.class),
        gson.fromJson("{\"id\": 1, \"vector\": [0.19886812562848388f, 0.06023560599112088f, 0.6976963061752597f, 0.2614474506242501f, 0.838729485096104f], \"color\": \"red_7025\"}", JsonObject.class),
        gson.fromJson("{\"id\": 2, \"vector\": [0.43742130801983836f, -0.5597502546264526f, 0.6457887650909682f, 0.7894058910881185f, 0.20785793220625592f], \"color\": \"orange_6781\"}", JsonObject.class),
        gson.fromJson("{\"id\": 3, \"vector\": [0.3172005263489739f, 0.9719044792798428f, -0.36981146090600725f, -0.4860894583077995f, 0.95791889146345f], \"color\": \"pink_9298\"}", JsonObject.class),
        gson.fromJson("{\"id\": 4, \"vector\": [0.4452349528804562f, -0.8757026943054742f, 0.8220779437047674f, 0.46406290649483184f, 0.30337481143159106f], \"color\": \"red_4794\"}", JsonObject.class),
        gson.fromJson("{\"id\": 5, \"vector\": [0.985825131989184f, -0.8144651566660419f, 0.6299267002202009f, 0.1206906911183383f, -0.1446277761879955f], \"color\": \"yellow_4222\"}", JsonObject.class),
        gson.fromJson("{\"id\": 6, \"vector\": [0.8371977790571115f, -0.015764369584852833f, -0.31062937026679327f, -0.562666951622192f, -0.8984947637863987f], \"color\": \"red_9392\"}", JsonObject.class),
        gson.fromJson("{\"id\": 7, \"vector\": [-0.33445148015177995f, -0.2567135004164067f, 0.8987539745369246f, 0.9402995886420709f, 0.5378064918413052f], \"color\": \"grey_8510\"}", JsonObject.class),
        gson.fromJson("{\"id\": 8, \"vector\": [0.39524717779832685f, 0.4000257286739164f, -0.5890507376891594f, -0.8650502298996872f, -0.6140360785406336f], \"color\": \"white_9381\"}", JsonObject.class),
        gson.fromJson("{\"id\": 9, \"vector\": [0.5718280481994695f, 0.24070317428066512f, -0.3737913482606834f, -0.06726932177492717f, -0.6980531615588608f], \"color\": \"purple_4976\"}", JsonObject.class)
);

InsertReq insertReq = InsertReq.builder()
        .collectionName("quick_setup")
        .data(data)
        .build();

InsertResp insertResp = client.insert(insertReq);
System.out.println(insertResp);

// Output:
//
// InsertResp(InsertCnt=10, primaryKeys=[0, 1, 2, 3, 4, 5, 6, 7, 8, 9])

const { MilvusClient, DataType } = require("@zilliz/milvus2-sdk-node")

const address = "http://localhost:19530";
const token = "root:Milvus";
const client = new MilvusClient({address, token});

// 3. Insert some data

var data = [
    {id: 0, vector: [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], color: "pink_8682"},
    {id: 1, vector: [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], color: "red_7025"},
    {id: 2, vector: [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], color: "orange_6781"},
    {id: 3, vector: [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], color: "pink_9298"},
    {id: 4, vector: [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], color: "red_4794"},
    {id: 5, vector: [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], color: "yellow_4222"},
    {id: 6, vector: [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], color: "red_9392"},
    {id: 7, vector: [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], color: "grey_8510"},
    {id: 8, vector: [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], color: "white_9381"},
    {id: 9, vector: [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], color: "purple_4976"}        
]

var res = await client.insert({
    collection_name: "quick_setup",
    data: data,
})

console.log(res.insert_cnt)

// Output
// 
// 10
// 

export CLUSTER_ENDPOINT="http://localhost:19530"
export TOKEN="root:Milvus"

curl --request POST \
--url "${CLUSTER_ENDPOINT}/v2/vectordb/entities/insert" \
--header "Authorization: Bearer ${TOKEN}" \
--header "Content-Type: application/json" \
-d '{
    "data": [
        {"id": 0, "vector": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], "color": "pink_8682"},
        {"id": 1, "vector": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], "color": "red_7025"},
        {"id": 2, "vector": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], "color": "orange_6781"},
        {"id": 3, "vector": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], "color": "pink_9298"},
        {"id": 4, "vector": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], "color": "red_4794"},
        {"id": 5, "vector": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], "color": "yellow_4222"},
        {"id": 6, "vector": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], "color": "red_9392"},
        {"id": 7, "vector": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], "color": "grey_8510"},
        {"id": 8, "vector": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], "color": "white_9381"},
        {"id": 9, "vector": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], "color": "purple_4976"}        
    ],
    "collectionName": "quick_setup"
}'

# {
#     "code": 0,
#     "data": {
#         "insertCount": 10,
#         "insertIds": [
#             0,
#             1,
#             2,
#             3,
#             4,
#             5,
#             6,
#             7,
#             8,
#             9
#         ]
#     }
# }

Insérer des entités dans une partition

Vous pouvez également insérer des entités dans une partition spécifiée. Les extraits de code suivants supposent que vous avez une partition nommée PartitionA dans votre collection.

data=[
    {"id": 10, "vector": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], "color": "pink_8682"},
    {"id": 11, "vector": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], "color": "red_7025"},
    {"id": 12, "vector": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], "color": "orange_6781"},
    {"id": 13, "vector": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], "color": "pink_9298"},
    {"id": 14, "vector": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], "color": "red_4794"},
    {"id": 15, "vector": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], "color": "yellow_4222"},
    {"id": 16, "vector": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], "color": "red_9392"},
    {"id": 17, "vector": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], "color": "grey_8510"},
    {"id": 18, "vector": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], "color": "white_9381"},
    {"id": 19, "vector": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], "color": "purple_4976"}
]

res = client.insert(
    collection_name="quick_setup",
    # highlight-next-line
    partition_name="partitionA",
    data=data
)

print(res)

# Output
# {'insert_count': 10, 'ids': [10, 11, 12, 13, 14, 15, 16, 17, 18, 19]}

import com.google.gson.Gson;
import com.google.gson.JsonObject;
import io.milvus.v2.service.vector.request.InsertReq;
import io.milvus.v2.service.vector.response.InsertResp;

import java.util.*;

Gson gson = new Gson();
List<JsonObject> data = Arrays.asList(
        gson.fromJson("{\"id\": 10, \"vector\": [0.3580376395471989f, -0.6023495712049978f, 0.18414012509913835f, -0.26286205330961354f, 0.9029438446296592f], \"color\": \"pink_8682\"}", JsonObject.class),
        gson.fromJson("{\"id\": 11, \"vector\": [0.19886812562848388f, 0.06023560599112088f, 0.6976963061752597f, 0.2614474506242501f, 0.838729485096104f], \"color\": \"red_7025\"}", JsonObject.class),
        gson.fromJson("{\"id\": 12, \"vector\": [0.43742130801983836f, -0.5597502546264526f, 0.6457887650909682f, 0.7894058910881185f, 0.20785793220625592f], \"color\": \"orange_6781\"}", JsonObject.class),
        gson.fromJson("{\"id\": 13, \"vector\": [0.3172005263489739f, 0.9719044792798428f, -0.36981146090600725f, -0.4860894583077995f, 0.95791889146345f], \"color\": \"pink_9298\"}", JsonObject.class),
        gson.fromJson("{\"id\": 14, \"vector\": [0.4452349528804562f, -0.8757026943054742f, 0.8220779437047674f, 0.46406290649483184f, 0.30337481143159106f], \"color\": \"red_4794\"}", JsonObject.class),
        gson.fromJson("{\"id\": 15, \"vector\": [0.985825131989184f, -0.8144651566660419f, 0.6299267002202009f, 0.1206906911183383f, -0.1446277761879955f], \"color\": \"yellow_4222\"}", JsonObject.class),
        gson.fromJson("{\"id\": 16, \"vector\": [0.8371977790571115f, -0.015764369584852833f, -0.31062937026679327f, -0.562666951622192f, -0.8984947637863987f], \"color\": \"red_9392\"}", JsonObject.class),
        gson.fromJson("{\"id\": 17, \"vector\": [-0.33445148015177995f, -0.2567135004164067f, 0.8987539745369246f, 0.9402995886420709f, 0.5378064918413052f], \"color\": \"grey_8510\"}", JsonObject.class),
        gson.fromJson("{\"id\": 18, \"vector\": [0.39524717779832685f, 0.4000257286739164f, -0.5890507376891594f, -0.8650502298996872f, -0.6140360785406336f], \"color\": \"white_9381\"}", JsonObject.class),
        gson.fromJson("{\"id\": 19, \"vector\": [0.5718280481994695f, 0.24070317428066512f, -0.3737913482606834f, -0.06726932177492717f, -0.6980531615588608f], \"color\": \"purple_4976\"}", JsonObject.class)
);

InsertReq insertReq = InsertReq.builder()
        .collectionName("quick_setup")
        .partitionName("partitionA")
        .data(data)
        .build();

InsertResp insertResp = client.insert(insertReq);
System.out.println(insertResp);

// Output:
//
// InsertResp(InsertCnt=10, primaryKeys=[10, 11, 12, 13, 14, 15, 16, 17, 18, 19])

const { MilvusClient, DataType } = require("@zilliz/milvus2-sdk-node")

// 3. Insert some data

var data = [
    {id: 10, vector: [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], color: "pink_8682"},
    {id: 11, vector: [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], color: "red_7025"},
    {id: 12, vector: [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], color: "orange_6781"},
    {id: 13, vector: [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], color: "pink_9298"},
    {id: 14, vector: [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], color: "red_4794"},
    {id: 15, vector: [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], color: "yellow_4222"},
    {id: 16, vector: [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], color: "red_9392"},
    {id: 17, vector: [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], color: "grey_8510"},
    {id: 18, vector: [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], color: "white_9381"},
    {id: 19, vector: [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], color: "purple_4976"}        
]

var res = await client.insert({
    collection_name: "quick_setup",
    // highlight-next-line
    partition_name: "partitionA",
    data: data,
})

console.log(res.insert_cnt)

// Output
// 
// 10
// 

export CLUSTER_ENDPOINT="http://localhost:19530"
export TOKEN="root:Milvus"

curl --request POST \
--url "${CLUSTER_ENDPOINT}/v2/vectordb/entities/insert" \
--header "Authorization: Bearer ${TOKEN}" \
--header "Content-Type: application/json" \
-d '{
    "data": [
        {"id": 10, "vector": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], "color": "pink_8682"},
        {"id": 11, "vector": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], "color": "red_7025"},
        {"id": 12, "vector": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], "color": "orange_6781"},
        {"id": 13, "vector": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], "color": "pink_9298"},
        {"id": 14, "vector": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], "color": "red_4794"},
        {"id": 15, "vector": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], "color": "yellow_4222"},
        {"id": 16, "vector": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], "color": "red_9392"},
        {"id": 17, "vector": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], "color": "grey_8510"},
        {"id": 18, "vector": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], "color": "white_9381"},
        {"id": 19, "vector": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], "color": "purple_4976"}        
    ],
    "collectionName": "quick_setup",
    "partitionName": "partitionA"
}'

# {
#     "code": 0,
#     "data": {
#         "insertCount": 10,
#         "insertIds": [
#             10,
#             11,
#             12,
#             13,
#             14,
#             15,
#             16,
#             17,
#             18,
#             19
#         ]
#     }
# }