Insertar entidades
Las entidades de una colección son registros de datos que comparten el mismo conjunto de campos. Los valores de los campos de cada registro de datos forman una entidad. En esta página se explica cómo insertar entidades en una colección.
Campos añadidos tras la creación de la colección: si añades nuevos campos a una colección tras su creación y no especificas valores durante la inserción, Milvus los rellena automáticamente con los valores por defecto definidos o con «
NULL» si no se han establecido valores por defecto. Para más detalles, consulta «Modificar el esquema de la colección».Gestión de duplicados: la operación estándar «
insert» no comprueba si hay claves primarias duplicadas. Al insertar datos con una clave primaria ya existente, se crea una nueva entidad con la misma clave, lo que da lugar a la duplicación de datos y a posibles problemas en la aplicación. Para actualizar entidades existentes o evitar duplicados, utilice en su lugar laupsert. Para obtener más información, consulta «Upsert de entidades».
Descripción general
En Milvus, una entidad hace referencia a los registros de datos de una colección que comparten el mismo esquema, y los datos de cada campo de una fila constituyen una entidad. Por lo tanto, las entidades de una misma colección tienen los mismos atributos (como nombres de campos, tipos de datos y otras restricciones).
Al insertar una entidad en una colección, la entidad que se va a insertar solo se podrá añadir correctamente si contiene todos los campos definidos en el esquema. La entidad insertada se incluirá en una partición denominada _default en el orden de inserción. Siempre que exista una partición concreta, también se pueden insertar entidades en dicha partición especificando el nombre de la partición en la solicitud de inserción.
Milvus también admite campos dinámicos para mantener la escalabilidad de la colección. Cuando el campo dinámico está habilitado, se pueden insertar en la colección campos que no estén definidos en el esquema. Estos campos y valores se almacenarán como pares clave-valor en un campo reservado denominado $meta. Para obtener más información sobre los campos dinámicos, consulte «Campo dinámico».
Insertar entidades en una colección
Antes de insertar datos, debe organizar sus datos en una lista de diccionarios según el esquema, de modo que cada diccionario represente una entidad y contenga todos los campos definidos en el esquema. Si la colección tiene habilitado el campo dinámico, cada diccionario también puede incluir campos que no estén definidos en el esquema.
En esta sección, insertará entidades en una colección creada mediante la configuración rápida. Una colección creada de esta manera solo tiene dos campos, denominados id y vector. Además, esta colección tiene habilitado el campo dinámico, por lo que las entidades del código de ejemplo incluyen un campo llamado color que no está definido en el esquema.
from pymilvus import MilvusClient
client = MilvusClient(
uri="http://localhost:19530",
token="root:Milvus"
)
data=[
{"id": 0, "vector": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], "color": "pink_8682"},
{"id": 1, "vector": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], "color": "red_7025"},
{"id": 2, "vector": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], "color": "orange_6781"},
{"id": 3, "vector": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], "color": "pink_9298"},
{"id": 4, "vector": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], "color": "red_4794"},
{"id": 5, "vector": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], "color": "yellow_4222"},
{"id": 6, "vector": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], "color": "red_9392"},
{"id": 7, "vector": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], "color": "grey_8510"},
{"id": 8, "vector": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], "color": "white_9381"},
{"id": 9, "vector": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], "color": "purple_4976"}
]
res = client.insert(
collection_name="quick_setup",
data=data
)
print(res)
# Output
# {'insert_count': 10, 'ids': [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]}
import com.google.gson.Gson;
import com.google.gson.JsonObject;
import io.milvus.v2.client.ConnectConfig;
import io.milvus.v2.client.MilvusClientV2;
import io.milvus.v2.service.vector.request.InsertReq;
import io.milvus.v2.service.vector.response.InsertResp;
import java.util.*;
MilvusClientV2 client = new MilvusClientV2(ConnectConfig.builder()
.uri("http://localhost:19530")
.token("root:Milvus")
.build());
Gson gson = new Gson();
List<JsonObject> data = Arrays.asList(
gson.fromJson("{\"id\": 0, \"vector\": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], \"color\": \"pink_8682\"}", JsonObject.class),
gson.fromJson("{\"id\": 1, \"vector\": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], \"color\": \"red_7025\"}", JsonObject.class),
gson.fromJson("{\"id\": 2, \"vector\": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], \"color\": \"orange_6781\"}", JsonObject.class),
gson.fromJson("{\"id\": 3, \"vector\": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], \"color\": \"pink_9298\"}", JsonObject.class),
gson.fromJson("{\"id\": 4, \"vector\": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], \"color\": \"red_4794\"}", JsonObject.class),
gson.fromJson("{\"id\": 5, \"vector\": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], \"color\": \"yellow_4222\"}", JsonObject.class),
gson.fromJson("{\"id\": 6, \"vector\": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], \"color\": \"red_9392\"}", JsonObject.class),
gson.fromJson("{\"id\": 7, \"vector\": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], \"color\": \"grey_8510\"}", JsonObject.class),
gson.fromJson("{\"id\": 8, \"vector\": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], \"color\": \"white_9381\"}", JsonObject.class),
gson.fromJson("{\"id\": 9, \"vector\": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], \"color\": \"purple_4976\"}", JsonObject.class)
);
InsertReq insertReq = InsertReq.builder()
.collectionName("quick_setup")
.data(data)
.build();
InsertResp insertResp = client.insert(insertReq);
System.out.println(insertResp);
// Output:
//
// InsertResp(InsertCnt=10, primaryKeys=[0, 1, 2, 3, 4, 5, 6, 7, 8, 9])
const { MilvusClient, DataType } = require("@zilliz/milvus2-sdk-node")
const address = "http://localhost:19530";
const token = "root:Milvus";
const client = new MilvusClient({address, token});
// 3. Insert some data
var data = [
{id: 0, vector: [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], color: "pink_8682"},
{id: 1, vector: [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], color: "red_7025"},
{id: 2, vector: [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], color: "orange_6781"},
{id: 3, vector: [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], color: "pink_9298"},
{id: 4, vector: [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], color: "red_4794"},
{id: 5, vector: [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], color: "yellow_4222"},
{id: 6, vector: [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], color: "red_9392"},
{id: 7, vector: [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], color: "grey_8510"},
{id: 8, vector: [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], color: "white_9381"},
{id: 9, vector: [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], color: "purple_4976"}
]
var res = await client.insert({
collection_name: "quick_setup",
data: data,
})
console.log(res.insert_cnt)
// Output
//
// 10
//
import (
"context"
"fmt"
"github.com/milvus-io/milvus/client/v2/column"
"github.com/milvus-io/milvus/client/v2/milvusclient"
)
ctx, cancel := context.WithCancel(context.Background())
defer cancel()
milvusAddr := "localhost:19530"
client, err := milvusclient.New(ctx, &milvusclient.ClientConfig{
Address: milvusAddr,
})
if err != nil {
fmt.Println(err.Error())
// handle error
}
defer client.Close(ctx)
dynamicColumn := column.NewColumnString("color", []string{
"pink_8682", "red_7025", "orange_6781", "pink_9298", "red_4794", "yellow_4222", "red_9392", "grey_8510", "white_9381", "purple_4976",
})
_, err = client.Insert(ctx, milvusclient.NewColumnBasedInsertOption("quick_setup").
WithInt64Column("id", []int64{0, 1, 2, 3, 4, 5, 6, 7, 8, 9}).
WithFloatVectorColumn("vector", 5, [][]float32{
{0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592},
{0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104},
{0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592},
{0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345},
{0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106},
{0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955},
{0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987},
{-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052},
{0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336},
{0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608},
}).
WithColumns(dynamicColumn),
)
if err != nil {
fmt.Println(err.Error())
// handle err
}
export CLUSTER_ENDPOINT="http://localhost:19530"
export TOKEN="root:Milvus"
curl --request POST \
--url "${CLUSTER_ENDPOINT}/v2/vectordb/entities/insert" \
--header "Authorization: Bearer ${TOKEN}" \
--header "Content-Type: application/json" \
-d '{
"data": [
{"id": 0, "vector": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], "color": "pink_8682"},
{"id": 1, "vector": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], "color": "red_7025"},
{"id": 2, "vector": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], "color": "orange_6781"},
{"id": 3, "vector": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], "color": "pink_9298"},
{"id": 4, "vector": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], "color": "red_4794"},
{"id": 5, "vector": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], "color": "yellow_4222"},
{"id": 6, "vector": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], "color": "red_9392"},
{"id": 7, "vector": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], "color": "grey_8510"},
{"id": 8, "vector": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], "color": "white_9381"},
{"id": 9, "vector": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], "color": "purple_4976"}
],
"collectionName": "quick_setup"
}'
# {
# "code": 0,
# "data": {
# "insertCount": 10,
# "insertIds": [
# 0,
# 1,
# 2,
# 3,
# 4,
# 5,
# 6,
# 7,
# 8,
# 9
# ]
# }
# }
Insertar entidades en una partición
También puede insertar entidades en una partición específica. Los siguientes fragmentos de código dan por hecho que tiene una partición llamada «PartitionA» en su colección.
data=[
{"id": 10, "vector": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], "color": "pink_8682"},
{"id": 11, "vector": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], "color": "red_7025"},
{"id": 12, "vector": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], "color": "orange_6781"},
{"id": 13, "vector": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], "color": "pink_9298"},
{"id": 14, "vector": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], "color": "red_4794"},
{"id": 15, "vector": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], "color": "yellow_4222"},
{"id": 16, "vector": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], "color": "red_9392"},
{"id": 17, "vector": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], "color": "grey_8510"},
{"id": 18, "vector": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], "color": "white_9381"},
{"id": 19, "vector": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], "color": "purple_4976"}
]
res = client.insert(
collection_name="quick_setup",
partition_name="partitionA",
data=data
)
print(res)
# Output
# {'insert_count': 10, 'ids': [10, 11, 12, 13, 14, 15, 16, 17, 18, 19]}
import com.google.gson.Gson;
import com.google.gson.JsonObject;
import io.milvus.v2.service.vector.request.InsertReq;
import io.milvus.v2.service.vector.response.InsertResp;
import java.util.*;
Gson gson = new Gson();
List<JsonObject> data = Arrays.asList(
gson.fromJson("{\"id\": 10, \"vector\": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], \"color\": \"pink_8682\"}", JsonObject.class),
gson.fromJson("{\"id\": 11, \"vector\": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], \"color\": \"red_7025\"}", JsonObject.class),
gson.fromJson("{\"id\": 12, \"vector\": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], \"color\": \"orange_6781\"}", JsonObject.class),
gson.fromJson("{\"id\": 13, \"vector\": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], \"color\": \"pink_9298\"}", JsonObject.class),
gson.fromJson("{\"id\": 14, \"vector\": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], \"color\": \"red_4794\"}", JsonObject.class),
gson.fromJson("{\"id\": 15, \"vector\": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], \"color\": \"yellow_4222\"}", JsonObject.class),
gson.fromJson("{\"id\": 16, \"vector\": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], \"color\": \"red_9392\"}", JsonObject.class),
gson.fromJson("{\"id\": 17, \"vector\": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], \"color\": \"grey_8510\"}", JsonObject.class),
gson.fromJson("{\"id\": 18, \"vector\": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], \"color\": \"white_9381\"}", JsonObject.class),
gson.fromJson("{\"id\": 19, \"vector\": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], \"color\": \"purple_4976\"}", JsonObject.class)
);
InsertReq insertReq = InsertReq.builder()
.collectionName("quick_setup")
.partitionName("partitionA")
.data(data)
.build();
InsertResp insertResp = client.insert(insertReq);
System.out.println(insertResp);
// Output:
//
// InsertResp(InsertCnt=10, primaryKeys=[10, 11, 12, 13, 14, 15, 16, 17, 18, 19])
const { MilvusClient, DataType } = require("@zilliz/milvus2-sdk-node")
// 3. Insert some data
var data = [
{id: 10, vector: [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], color: "pink_8682"},
{id: 11, vector: [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], color: "red_7025"},
{id: 12, vector: [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], color: "orange_6781"},
{id: 13, vector: [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], color: "pink_9298"},
{id: 14, vector: [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], color: "red_4794"},
{id: 15, vector: [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], color: "yellow_4222"},
{id: 16, vector: [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], color: "red_9392"},
{id: 17, vector: [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], color: "grey_8510"},
{id: 18, vector: [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], color: "white_9381"},
{id: 19, vector: [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], color: "purple_4976"}
]
var res = await client.insert({
collection_name: "quick_setup",
partition_name: "partitionA",
data: data,
})
console.log(res.insert_cnt)
// Output
//
// 10
//
dynamicColumn = column.NewColumnString("color", []string{
"pink_8682", "red_7025", "orange_6781", "pink_9298", "red_4794", "yellow_4222", "red_9392", "grey_8510", "white_9381", "purple_4976",
})
_, err = client.Insert(ctx, milvusclient.NewColumnBasedInsertOption("quick_setup").
WithPartition("partitionA").
WithInt64Column("id", []int64{10, 11, 12, 13, 14, 15, 16, 17, 18, 19}).
WithFloatVectorColumn("vector", 5, [][]float32{
{0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592},
{0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104},
{0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592},
{0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345},
{0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106},
{0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955},
{0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987},
{-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052},
{0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336},
{0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608},
}).
WithColumns(dynamicColumn),
)
if err != nil {
fmt.Println(err.Error())
// handle err
}
export CLUSTER_ENDPOINT="http://localhost:19530"
export TOKEN="root:Milvus"
curl --request POST \
--url "${CLUSTER_ENDPOINT}/v2/vectordb/entities/insert" \
--header "Authorization: Bearer ${TOKEN}" \
--header "Content-Type: application/json" \
-d '{
"data": [
{"id": 10, "vector": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], "color": "pink_8682"},
{"id": 11, "vector": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], "color": "red_7025"},
{"id": 12, "vector": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], "color": "orange_6781"},
{"id": 13, "vector": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], "color": "pink_9298"},
{"id": 14, "vector": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], "color": "red_4794"},
{"id": 15, "vector": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], "color": "yellow_4222"},
{"id": 16, "vector": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], "color": "red_9392"},
{"id": 17, "vector": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], "color": "grey_8510"},
{"id": 18, "vector": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], "color": "white_9381"},
{"id": 19, "vector": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], "color": "purple_4976"}
],
"collectionName": "quick_setup",
"partitionName": "partitionA"
}'
# {
# "code": 0,
# "data": {
# "insertCount": 10,
# "insertIds": [
# 10,
# 11,
# 12,
# 13,
# 14,
# 15,
# 16,
# 17,
# 18,
# 19
# ]
# }
# }
