Kueri

Selain pencarian ANN, Milvus juga mendukung pemfilteran metadata melalui kueri. Halaman ini memperkenalkan cara menggunakan Query, Get, dan QueryIterator untuk melakukan pemfilteran metadata.

Gambaran Umum

Koleksi dapat menyimpan berbagai jenis bidang skalar. Anda bisa membuat Milvus memfilter Entitas berdasarkan satu atau beberapa field skalar. Milvus menawarkan tiga jenis kueri: Query, Get, dan QueryIterator. Tabel di bawah ini membandingkan ketiga jenis kueri tersebut.

	Dapatkan	Query	QueryIterator
Skenario yang berlaku	Untuk menemukan entitas yang memiliki kunci utama yang ditentukan.	Untuk menemukan semua atau sejumlah entitas tertentu yang memenuhi kondisi pemfilteran kustom	Untuk menemukan semua entitas yang memenuhi kondisi pemfilteran khusus dalam kueri berpaginasi.
Metode pemfilteran	Dengan kunci primer	Dengan memfilter ekspresi.	Dengan memfilter ekspresi.
Parameter wajib	Nama koleksi Kunci primer	Nama koleksi Memfilter ekspresi	Nama koleksi Ekspresi pemfilteran Jumlah entitas yang akan dikembalikan per kueri
Parameter opsional	Nama partisi Bidang keluaran	Nama partisi Jumlah entitas yang akan dikembalikan Bidang keluaran	Nama partisi Jumlah entitas yang akan dikembalikan secara total Bidang keluaran
Pengembalian	Mengembalikan entitas yang menyimpan kunci utama yang ditentukan dalam koleksi atau partisi yang ditentukan.	Mengembalikan semua atau sejumlah entitas tertentu yang memenuhi kondisi pemfilteran khusus dalam koleksi atau partisi yang ditentukan.	Mengembalikan semua entitas yang memenuhi kondisi pemfilteran khusus dalam koleksi atau partisi yang ditentukan melalui kueri ber-halaman.

Untuk mengetahui lebih lanjut tentang pemfilteran metadata, lihat .

Menggunakan Mendapatkan

Saat Anda perlu mencari entitas berdasarkan kunci utamanya, Anda dapat menggunakan metode Get. Contoh kode berikut ini mengasumsikan bahwa ada tiga bidang bernama id, vector, dan color dalam koleksi Anda.

[
        {"id": 0, "vector": [0.3580376395471989, -0.6023495712049978, 0.18414012509913835, -0.26286205330961354, 0.9029438446296592], "color": "pink_8682"},
        {"id": 1, "vector": [0.19886812562848388, 0.06023560599112088, 0.6976963061752597, 0.2614474506242501, 0.838729485096104], "color": "red_7025"},
        {"id": 2, "vector": [0.43742130801983836, -0.5597502546264526, 0.6457887650909682, 0.7894058910881185, 0.20785793220625592], "color": "orange_6781"},
        {"id": 3, "vector": [0.3172005263489739, 0.9719044792798428, -0.36981146090600725, -0.4860894583077995, 0.95791889146345], "color": "pink_9298"},
        {"id": 4, "vector": [0.4452349528804562, -0.8757026943054742, 0.8220779437047674, 0.46406290649483184, 0.30337481143159106], "color": "red_4794"},
        {"id": 5, "vector": [0.985825131989184, -0.8144651566660419, 0.6299267002202009, 0.1206906911183383, -0.1446277761879955], "color": "yellow_4222"},
        {"id": 6, "vector": [0.8371977790571115, -0.015764369584852833, -0.31062937026679327, -0.562666951622192, -0.8984947637863987], "color": "red_9392"},
        {"id": 7, "vector": [-0.33445148015177995, -0.2567135004164067, 0.8987539745369246, 0.9402995886420709, 0.5378064918413052], "color": "grey_8510"},
        {"id": 8, "vector": [0.39524717779832685, 0.4000257286739164, -0.5890507376891594, -0.8650502298996872, -0.6140360785406336], "color": "white_9381"},
        {"id": 9, "vector": [0.5718280481994695, 0.24070317428066512, -0.3737913482606834, -0.06726932177492717, -0.6980531615588608], "color": "purple_4976"},
]

Anda bisa mendapatkan entitas berdasarkan ID-nya sebagai berikut.

from pymilvus import MilvusClient

client = MilvusClient(
    uri="http://localhost:19530",
    token="root:Milvus"
)

res = client.get(
    collection_name="my_collection",
    ids=[0, 1, 2],
    output_fields=["vector", "color"]
)

print(res)

import io.milvus.v2.client.ConnectConfig;
import io.milvus.v2.client.MilvusClientV2;
import io.milvus.v2.service.vector.request.GetReq
import io.milvus.v2.service.vector.request.GetResp
import io.milvus.v2.service.vector.response.QueryResp;
import java.util.*;

MilvusClientV2 client = new MilvusClientV2(ConnectConfig.builder()
        .uri("http://localhost:19530")
        .token("root:Milvus")
        .build());
        
GetReq getReq = GetReq.builder()
        .collectionName("my_collection")
        .ids(Arrays.asList(0, 1, 2))
        .outputFields(Arrays.asList("vector", "color"))
        .build();

GetResp getResp = client.get(getReq);

List<QueryResp.QueryResult> results = getResp.getGetResults();
for (QueryResp.QueryResult result : results) {
    System.out.println(result.getEntity());
}

// Output
// {color=pink_8682, vector=[0.35803765, -0.6023496, 0.18414013, -0.26286206, 0.90294385], id=0}
// {color=red_7025, vector=[0.19886813, 0.060235605, 0.6976963, 0.26144746, 0.8387295], id=1}
// {color=orange_6781, vector=[0.43742132, -0.55975026, 0.6457888, 0.7894059, 0.20785794], id=2}

import (
    "context"
    "fmt"

    "github.com/milvus-io/milvus/client/v2/column"
    "github.com/milvus-io/milvus/client/v2/entity"
    "github.com/milvus-io/milvus/client/v2/milvusclient"
)

ctx, cancel := context.WithCancel(context.Background())
defer cancel()

milvusAddr := "localhost:19530"
client, err := milvusclient.New(ctx, &milvusclient.ClientConfig{
    Address: milvusAddr,
})
if err != nil {
    fmt.Println(err.Error())
    // handle error
}
defer client.Close(ctx)

resultSet, err := client.Get(ctx, milvusclient.NewQueryOption("my_collection").
    WithConsistencyLevel(entity.ClStrong).
    WithIDs(column.NewColumnInt64("id", []int64{0, 1, 2})).
    WithOutputFields("vector", "color"))
if err != nil {
    fmt.Println(err.Error())
    // handle error
}

fmt.Println("id: ", resultSet.GetColumn("id").FieldData().GetScalars())
fmt.Println("vector: ", resultSet.GetColumn("vector").FieldData().GetVectors())
fmt.Println("color: ", resultSet.GetColumn("color").FieldData().GetScalars())

import { MilvusClient, DataType } from "@zilliz/milvus2-sdk-node";

const address = "http://localhost:19530";
const token = "root:Milvus";
const client = new MilvusClient({address, token});

const res = client.get({
    collection_name="my_collection",
    ids=[0,1,2],
    output_fields=["vector", "color"]
})

export CLUSTER_ENDPOINT="http://localhost:19530"
export TOKEN="root:Milvus"

curl --request POST \
--url "${CLUSTER_ENDPOINT}/v2/vectordb/entities/get" \
--header "Authorization: Bearer ${TOKEN}" \
--header "Content-Type: application/json" \
--header "Request-Timeout: 10" \
-d '{
    "collectionName": "my_collection",
    "id": [0, 1, 2],
    "outputFields": ["vector", "color"]
}'

# {"code":0,"cost":0,"data":[{"color":"pink_8682","id":0,"vector":[0.35803765,-0.6023496,0.18414013,-0.26286206,0.90294385]},{"color":"red_7025","id":1,"vector":[0.19886813,0.060235605,0.6976963,0.26144746,0.8387295]},{"color":"orange_6781","id":2,"vector":[0.43742132,-0.55975026,0.6457888,0.7894059,0.20785794]}]}

Menggunakan Query

Ketika Anda perlu menemukan entitas dengan kondisi pemfilteran khusus, gunakan metode Query. Contoh kode berikut ini mengasumsikan ada tiga bidang bernama id, vector, dan color dan mengembalikan jumlah entitas tertentu yang memiliki nilai color yang dimulai dengan red.

from pymilvus import MilvusClient

client = MilvusClient(
    uri="http://localhost:19530",
    token="root:Milvus"
)

res = client.query(
    collection_name="my_collection",
    filter="color like \"red%\"",
    output_fields=["vector", "color"],
    limit=3
)

import io.milvus.v2.service.vector.request.QueryReq
import io.milvus.v2.service.vector.request.QueryResp

QueryReq queryReq = QueryReq.builder()
        .collectionName("my_collection")
        .filter("color like \"red%\"")
        .outputFields(Arrays.asList("vector", "color"))
        .limit(3)
        .build();

QueryResp queryResp = client.query(queryReq);

List<QueryResp.QueryResult> results = queryResp.getQueryResults();
for (QueryResp.QueryResult result : results) {
    System.out.println(result.getEntity());
}

// Output
// {color=red_7025, vector=[0.19886813, 0.060235605, 0.6976963, 0.26144746, 0.8387295], id=1}
// {color=red_4794, vector=[0.44523495, -0.8757027, 0.82207793, 0.4640629, 0.3033748], id=4}
// {color=red_9392, vector=[0.8371978, -0.015764369, -0.31062937, -0.56266695, -0.8984948], id=6}

resultSet, err := client.Query(ctx, milvusclient.NewQueryOption("my_collection").
    WithFilter("color like \"red%\"").
    WithOutputFields("vector", "color"))
if err != nil {
    fmt.Println(err.Error())
    // handle error
}

fmt.Println("id: ", resultSet.GetColumn("id").FieldData().GetScalars())
fmt.Println("vector: ", resultSet.GetColumn("vector").FieldData().GetVectors())
fmt.Println("color: ", resultSet.GetColumn("color").FieldData().GetScalars())

import { MilvusClient, DataType } from "@zilliz/milvus2-sdk-node";

const address = "http://localhost:19530";
const token = "root:Milvus";
const client = new MilvusClient({address, token});

const res = client.query({
    collection_name="my_collection",
    filter='color like "red%"',
    output_fields=["vector", "color"],
    limit(3)
})

export CLUSTER_ENDPOINT="http://localhost:19530"
export TOKEN="root:Milvus"

curl --request POST \
--url "${CLUSTER_ENDPOINT}/v2/vectordb/entities/query" \
--header "Authorization: Bearer ${TOKEN}" \
--header "Content-Type: application/json" \
--header "Request-Timeout: 10" \
-d '{
    "collectionName": "my_collection",
    "filter": "color like \"red%\"",
    "limit": 3,
    "outputFields": ["vector", "color"]
}'
#{"code":0,"cost":0,"data":[{"color":"red_7025","id":1,"vector":[0.19886813,0.060235605,0.6976963,0.26144746,0.8387295]},{"color":"red_4794","id":4,"vector":[0.44523495,-0.8757027,0.82207793,0.4640629,0.3033748]},{"color":"red_9392","id":6,"vector":[0.8371978,-0.015764369,-0.31062937,-0.56266695,-0.8984948]}]}

Gunakan QueryIterator

Ketika Anda perlu menemukan entitas dengan kondisi pemfilteran khusus melalui kueri berpaginasi, buat QueryIterator dan gunakan metode next() untuk mengulang semua entitas untuk menemukan entitas yang memenuhi kondisi pemfilteran. Contoh kode berikut ini mengasumsikan bahwa ada tiga field bernama id, vector, dan color dan mengembalikan semua entitas yang memiliki nilai color yang dimulai dengan red.

from pymilvus import connections, Collection

connections.connect(
    uri="http://localhost:19530",
    token="root:Milvus"
)

collection = Collection("my_collection")

iterator = collection.query_iterator(
    batch_size=10,
    expr="color like \"red%\"",
    output_fields=["color"]
)

results = []

while True:
    result = iterator.next()
    if not result:
        iterator.close()
        break

    print(result)
    results += result

import io.milvus.orm.iterator.QueryIterator;
import io.milvus.response.QueryResultsWrapper;
import io.milvus.v2.common.ConsistencyLevel;
import io.milvus.v2.service.vector.request.QueryIteratorReq;

QueryIteratorReq req = QueryIteratorReq.builder()
        .collectionName("my_collection")
        .expr("color like \"red%\"")
        .batchSize(50L)
        .outputFields(Collections.singletonList("color"))
        .consistencyLevel(ConsistencyLevel.BOUNDED)
        .build();
QueryIterator queryIterator = client.queryIterator(req);

while (true) {
    List<QueryResultsWrapper.RowRecord> res = queryIterator.next();
    if (res.isEmpty()) {
        queryIterator.close();
        break;
    }

    for (QueryResultsWrapper.RowRecord record : res) {
        System.out.println(record);
    }
}

// Output
// [color:red_7025, id:1]
// [color:red_4794, id:4]
// [color:red_9392, id:6]

// go

import { MilvusClient, DataType } from "@zilliz/milvus2-sdk-node";

const iterator = await milvusClient.queryIterator({
  collection_name: 'my_collection',
  batchSize: 10,
  expr: 'color like "red%"',
  output_fields: ['color'],
});

const results = [];
for await (const value of iterator) {
  results.push(...value);
  page += 1;
}

# Not available

Kueri dalam Partisi

Anda juga dapat melakukan kueri dalam satu atau beberapa partisi dengan menyertakan nama partisi dalam permintaan Get, Query, atau QueryIterator. Contoh kode berikut ini mengasumsikan bahwa ada partisi bernama PartitionA di dalam koleksi.

from pymilvus import MilvusClient
client = MilvusClient(
    uri="http://localhost:19530",
    token="root:Milvus"
)

res = client.get(
    collection_name="my_collection",
    partitionNames=["partitionA"],
    ids=[10, 11, 12],
    output_fields=["vector", "color"]
)

from pymilvus import MilvusClient

client = MilvusClient(
    uri="http://localhost:19530",
    token="root:Milvus"
)

res = client.query(
    collection_name="my_collection",
    partitionNames=["partitionA"],
    filter="color like \"red%\"",
    output_fields=["vector", "color"],
    limit=3
)

# Use QueryIterator
from pymilvus import connections, Collection

connections.connect(
    uri="http://localhost:19530",
    token="root:Milvus"
)

collection = Collection("my_collection")

iterator = collection.query_iterator(
    partition_names=["partitionA"],
    batch_size=10,
    expr="color like \"red%\"",
    output_fields=["color"]
)

results = []

while True:
    result = iterator.next()
    if not result:
        iterator.close()
        break

    print(result)
    results += result

GetReq getReq = GetReq.builder()
        .collectionName("my_collection")
        .partitionName("partitionA")
        .ids(Arrays.asList(10, 11, 12))
        .outputFields(Collections.singletonList("color"))
        .build();

GetResp getResp = client.get(getReq);

QueryReq queryReq = QueryReq.builder()
        .collectionName("my_collection")
        .partitionNames(Collections.singletonList("partitionA"))
        .filter("color like \"red%\"")
        .outputFields(Collections.singletonList("color"))
        .limit(3)
        .build();

QueryResp getResp = client.query(queryReq);

QueryIteratorReq req = QueryIteratorReq.builder()
        .collectionName("my_collection")
        .partitionNames(Collections.singletonList("partitionA"))
        .expr("color like \"red%\"")
        .batchSize(50L)
        .outputFields(Collections.singletonList("color"))
        .consistencyLevel(ConsistencyLevel.BOUNDED)
        .build();
QueryIterator queryIterator = client.queryIterator(req);

resultSet, err := client.Get(ctx, milvusclient.NewQueryOption("my_collection").
    WithPartitions("partitionA").
    WithIDs(column.NewColumnInt64("id", []int64{10, 11, 12})).
    WithOutputFields("vector", "color"))
if err != nil {
    fmt.Println(err.Error())
    // handle error
}

fmt.Println("id: ", resultSet.GetColumn("id").FieldData().GetScalars())
fmt.Println("vector: ", resultSet.GetColumn("vector").FieldData().GetVectors())
fmt.Println("color: ", resultSet.GetColumn("color").FieldData().GetScalars())

resultSet, err := client.Query(ctx, milvusclient.NewQueryOption("my_collection").
    WithPartitions("partitionA").
    WithFilter("color like \"red%\"").
    WithOutputFields("vector", "color"))
if err != nil {
    fmt.Println(err.Error())
    // handle error
}

fmt.Println("id: ", resultSet.GetColumn("id").FieldData().GetScalars())
fmt.Println("vector: ", resultSet.GetColumn("vector").FieldData().GetVectors())
fmt.Println("color: ", resultSet.GetColumn("color").FieldData().GetScalars())

import { MilvusClient, DataType } from "@zilliz/milvus2-sdk-node";

const address = "http://localhost:19530";
const token = "root:Milvus";
const client = new MilvusClient({address, token});

// Use get
var res = client.query({
    collection_name="my_collection",
    partition_names=["partitionA"],
    filter='color like "red%"',
    output_fields=["vector", "color"],
    limit(3)
})

// Use query
res = client.query({
    collection_name="my_collection",
    partition_names=["partitionA"],
    filter="color like \"red%\"",
    output_fields=["vector", "color"],
    limit(3)
})

// Use queryiterator
const iterator = await milvusClient.queryIterator({
  collection_name: 'my_collection',
  partition_names: ['partitionA'],
  batchSize: 10,
  expr: 'color like "red%"',
  output_fields: ['vector', 'color'],
});

const results = [];
for await (const value of iterator) {
  results.push(...value);
  page += 1;
}

export CLUSTER_ENDPOINT="http://localhost:19530"
export TOKEN="root:Milvus"

# Use get
curl --request POST \
--url "${CLUSTER_ENDPOINT}/v2/vectordb/entities/get" \
--header "Authorization: Bearer ${TOKEN}" \
--header "Content-Type: application/json" \
--header "Request-Timeout: 10" \
-d '{
    "collectionName": "my_collection",
    "partitionNames": ["partitionA"],
    "id": [0, 1, 2],
    "outputFields": ["vector", "color"]
}'

# Use query
curl --request POST \
--url "${CLUSTER_ENDPOINT}/v2/vectordb/entities/get" \
--header "Authorization: Bearer ${TOKEN}" \
--header "Content-Type: application/json" \
--header "Request-Timeout: 10" \
-d '{
    "collectionName": "my_collection",
    "partitionNames": ["partitionA"],
    "filter": "color like \"red%\"",
    "limit": 3,
    "outputFields": ["vector", "color"],
    "id": [0, 1, 2]
}'

Pengambilan Sampel Acak dengan Query

Untuk mengekstrak subset data yang representatif dari koleksi Anda untuk eksplorasi data atau pengujian pengembangan, gunakan ekspresi RANDOM_SAMPLE(sampling_factor), di mana sampling_factor adalah float antara 0 dan 1 yang mewakili persentase data yang akan diambil sampelnya.

from pymilvus import MilvusClient

client = MilvusClient(
    uri="http://localhost:19530",
    token="root:Milvus"
)

# Sample 1% of the entire collection
res = client.query(
    collection_name="my_collection",
    filter="RANDOM_SAMPLE(0.01)",
    output_fields=["vector", "color"]
)

print(f"Sampled {len(res)} entities from collection")

# Combine with other filters - first filter, then sample
res = client.query(
    collection_name="my_collection", 
    filter="color like \"red%\" AND RANDOM_SAMPLE(0.005)",
    output_fields=["vector", "color"],
    limit=10
)

print(f"Found {len(res)} red items in sample")

import io.milvus.v2.client.ConnectConfig;
import io.milvus.v2.client.MilvusClientV2;
import io.milvus.v2.service.vector.request.GetReq
import io.milvus.v2.service.vector.request.GetResp
import io.milvus.v2.service.vector.request.QueryReq
import io.milvus.v2.service.vector.request.QueryResp
import java.util.*;

MilvusClientV2 client = new MilvusClientV2(ConnectConfig.builder()
        .uri("http://localhost:19530")
        .token("root:Milvus")
        .build());

QueryReq queryReq = QueryReq.builder()
        .collectionName("my_collection")
        .filter("RANDOM_SAMPLE(0.01)")
        .outputFields(Arrays.asList("vector", "color"))
        .build();

QueryResp getResp = client.query(queryReq);
for (QueryResp.QueryResult result : getResp.getQueryResults()) {
    System.out.println(result.getEntity());
}

queryReq = QueryReq.builder()
        .collectionName("my_collection")
        .filter("color like \"red%\" AND RANDOM_SAMPLE(0.005)")
        .outputFields(Arrays.asList("vector", "color"))
        .limit(10)
        .build();

getResp = client.query(queryReq);
for (QueryResp.QueryResult result : getResp.getQueryResults()) {
    System.out.println(result.getEntity());
}

import (
    "context"
    "fmt"

    "github.com/milvus-io/milvus/client/v2/column"
    "github.com/milvus-io/milvus/client/v2/entity"
    "github.com/milvus-io/milvus/client/v2/milvusclient"
)

ctx, cancel := context.WithCancel(context.Background())
defer cancel()

milvusAddr := "localhost:19530"
client, err := milvusclient.New(ctx, &milvusclient.ClientConfig{
    Address: milvusAddr,
})
if err != nil {
    return err
}

resultSet, err := client.Query(ctx, milvusclient.NewQueryOption("my_collection").
    WithFilter("RANDOM_SAMPLE(0.01)").
    WithOutputFields("vector", "color"))
if err != nil {
    return err
}

resultSet, err = client.Query(ctx, milvusclient.NewQueryOption("my_collection").
    WithFilter("color like \"red%\" AND RANDOM_SAMPLE(0.005)").
    WithLimit(10).
    WithOutputFields("vector", "color"))
if err != nil {
    return err
}

// node

# restful

Mengatur zona waktu untuk sementara untuk sebuah kueri

Jika koleksi Anda memiliki bidang TIMESTAMPTZ, Anda dapat mengganti zona waktu default basis data atau koleksi untuk sementara waktu untuk satu operasi dengan menyetel parameter timezone dalam panggilan kueri. Ini mengontrol bagaimana nilai TIMESTAMPTZ ditampilkan dan dibandingkan selama operasi.

Nilai timezone harus berupa pengenal zona waktu IANA yang valid (misalnya, Asia/Shanghai, Amerika/Chicago, atau UTC). Untuk detail tentang cara menggunakan bidang TIMESTAMPTZ, lihat Bidang TIMESTAMPTZ.

Contoh di bawah ini menunjukkan cara menetapkan zona waktu sementara untuk operasi kueri:

# Query data and display the tsz field converted to "America/Havana"
results = client.query(
    collection_name,
    filter="id <= 10",
    output_fields=["id", "tsz", "vec"],
    limit=2,
    timezone="America/Havana",
)

// java

// js

// go

# restful